Paperduino Tiny include an ATtiny85 microcontroller and come with USB interface. Coding is similar to Arduino, and it use the familiar Arduino IDE for development.
Can be build in 1 hour for aprox. 4 USD.
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source - 5V
Built-in USB (and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
8k Flash Memory (about 6k after bootloader)
I2C and SPI (vis USI)
PWM on 3 pins (more possible with Software PWM)
ADC on 4 pins
Power LED and Test/Status LED (on Pin1)
The Wiki is open for collaborative editing!
Please feel free to edit any page to make corrections or add valuable information - please DO NOT remove information or replace the tutorials we have provided.
Editing syntax can be found here: http://www.paperduino.eu/doku.php?id=wiki:syntax
You can put here your project made with Paperduino…
I got lot of questions by email last days.
There is short FAQ:
Q: Are you able to send me ready to use Paperduino Tiny ?
A: No, try to build one by your self.
Q: Are you able to send me ATtiny85 with preprogrammed bootloader ?
A: Yes, please look on Burning bootloader page.
Q: Are you able to send me complete KIT for Paperduino Tiny ?
A: Yes, please look on Building Paperduino Tiny step by step page.